CIP 150 is a liquid, non-foaming, chlorinated CIP detergent that contains alkaline builders, water conditioners, rinsing agents and sequestering agents, inorganic emulsifiers and hypochlorite.
CIP 150 is useful on a wide variety of soils including juices, dairy, grease, blood and other difficult food soils. Cleans, destains and deodorizes most food processing equipment. This product is non-foaming, but can be combined with foam boosters for foam cleaning.
Use water at 100° – 120°F. Pre-rinse system with potable water. Dilute product at 0.5 oz – 2.00 oz/gallon and circulate through the system for 10 to 12 minutes. Keep temperature at 100° – 120°F during wash cycle. Rinse system thoroughly. Follow with acidified rinse. Acid rinse solution pH should be at 4.5. Rinse system thoroughly prior to using system. Sanitize equipment with MG Peracid 6, diluted per label instructions.
| pH | >12.0 |
| Foam | Non-Foaming |
| Appearance | Clear Yellow Liquid |
| Odor | Chlorine |
| DOT Shipping | UN 3266, Corrosive Liquid, Basic, Inorganic, N.O.S., (Potassium Hydroxide, Sodium Hypochlorite), 8, PG II |
| General use CIP | 0.5-2 oz per gallon |
| Heavy duty CIP & COP | 1-3 oz per gallon |
Stated Dilution’s are a recommended starting point only. Consult your Morgan-Gallacher, Inc. Representative for recommendations on site specific dilutions and methods.
