Fleet Bright contains a sophisticated combination of ingredients that remove built-up road film, heavy grease and oil with little-to-no scrubbing. Fleet Bright removes heavy oxidation from painted surfaces, especially truck frames, therebyrestoring a like new appearance to weather-beaten vehicles. Fleet Bright also contains metal corrosion inhibitors to help protect soft metals during cleaning.
Fleet Bright is effective on engines, trucks, buses, trains, cargo containers, concrete, and heavy machinery. Metal safe formulation will not harm surfaces.
Dilute Fleet Bright in a separate container in accordance with Dilution Guidelines chart. For best performance, use with warm water. Pre-rinse the surface to remove any loose soils. Test a small, inconspicuous area for compatibility before widespread use. Apply Fleet Bright solution to surface with foam apparatus, sprayer, sponge, or brush. For best results, start at the bottom of the surface and work up to the top. Allow sufficient time for the solution to penetrate caked on soils. Some scrubbing may be necessary to remove all soils. Rinse surface from the top to the bottom with fresh water. Dry.
| pH | >12 |
| Foam | High Foam |
| Appearance | Light Yellow. Transparent. |
| Odor | Slight Organic |
| DOT Shipping | UN 1814, Potassium Hydroxide Solution, Corrosive, 8, PG II |
| General Purpose | 1:40 to 1:20 |
| Heavy Dirt and Grease | 1:20 to 1:10 |
| Extremely heavy dirt, grease, and oxidation | 1:10 to 1:1 |
Stated Dilution’s are a recommended starting point only. Consult your Morgan-Gallacher, Inc. Representative for recommendations on site specific dilutions and methods.
