MG 4-Quat is a food contact surface sanitizer utilizing the 5th Generation, four-chain Quat. This concentrate provides the industry standard 1 ounce per 4 gallons dilution for a 200 ppm active quaternary sanitizer. This improved formula can be used at concentrations up to 400 ppm active quat on food contact surfaces and still maintain prior established USDA no-rinse standards. This provides a little “added insurance” under high soil load conditions.
MG 4-Quat is an effective sanitizer, disinfectant, virucide, mold & mildewstat, and deodorizer for hard non-porous surfaces. This product is safe for all washable surfaces as well as food contact surfaces such as those found in food processing and manufacturing plants, restaurants, hospitals and much more. MG 4-Quat can be sprayed, wiped, foamed or flooded and is can also be used as boot dip and doorway spray sanitizer. Consult the label for a full listing of EPA-registered uses.
Apply a solution of 1 to 2 ounce(s) of this product to 4 gallons of water, (200-400 ppm active) to precleaned, hard surfaces thoroughly wetting surfaces with a cloth, mop, sponge, sprayer or by immersion. For spray applications, use a coarse, pump or trigger sprayer. Spray 6 to 8 inches from surface, rub with brush, sponge, or cloth. With spray applications cover or remove all food products. Surfaces should remain wet for at least 1 minute followed by adequate draining and air drying. Consult product label for a full listing of uses with detailed usage and dilution instructions. Test concentration of solution with QT10 test strips or Quat Check 1000 Test Strips for higher concentrations.
| pH | 6.0 - 8.0 |
| Foam | Low Foam |
| Appearance | Transparent |
| Odor | |
| DOT Shipping | UN1903, Disinfectants, liquid, corrosive N.O.S. (Quaternary Ammonium Chloride), 8, PG II |
| Food contact surfaces | .25-.5 oz per gallon (200-400 ppm) |
| Floors, walls, doorways, foamers | 1-1.5 oz per gallon |
Stated Dilution’s are a recommended starting point only. Consult your Morgan-Gallacher, Inc. Representative for recommendations on site specific dilutions and methods.
