MG-95 B is a high-caustic, high-foaming liquid detergent useful in the removal of heavy oil and carbon. MG-95 B contains a proprietary blend of potassium & sodium hydroxide, wetting agents, rinsing additives and water conditioning agents. Penetrates tough soils, lifting and suspending them and rinsing freely in all water conditions.
MG-95 B can be used on fryers, smokehouses, ovens and ferrous metal equipment. Methods of application include bucket-and-brush, soak and scrub. This product can also be used to remove petroleum oil and inorganic soils. MG-95 B works best with warm water, but remains effective in cold water.
Dilute MG-95 B in a separate container in accordance with Dilution Guidelines chart. For best results, dilute with warm water. Rinse surface to be cleaned to remove any loose soils. Apply MG-95 B solution to entire surface with sponge or brush. For best results start at the bottom of the surface and work up to the top. Allow solution to penetrate caked on soils. Some scrubbing may be necessary to remove all soils. Rinse surface from top to bottom with fresh water. Flood food contact surfaces with MG 4-Quat Fifth-Generation Quaternary Sanitizer.
| pH | >12.0 |
| Foam | Low Foam |
| Appearance | Slightly Viscous Brown Liquid |
| Odor | |
| DOT Shipping | UN 3266, Corrosive Liquid, Basic, Inorganic, N.O.S., (Sodium Hydroxide, Potassium Hydroxide), 8, PG II |
| Heavy Soil | Do not dilute. Use-as-is. |
| Moderate Soil | 4-8 oz per gallon |
| Light soil | 1-4 oz per gallon |
Stated Dilution’s are a recommended starting point only. Consult your Morgan-Gallacher, Inc. Representative for recommendations on site specific dilutions and methods.
